August 09, 2020

Gravity Fall Metal Separator for Plastic, Needle

Model NO.: BH-20 to BH-70
Packing Size: 50*50*50cm
Certificate: SGS, Ce
Automation: Automatic
Warranty Period: 12 Months
Trademark: HADRDEGA
Transport Package: Wooden Case
Specification: BH-20----BH-70
Origin: China
HS Code: 8543709100
Model NO.: BH-20 to BH-70
Packing Size: 50*50*50cm
Certificate: SGS, Ce
Automation: Automatic
Warranty Period: 12 Months
Trademark: HADRDEGA
Transport Package: Wooden Case
Specification: BH-20----BH-70
Origin: China
HS Code: 8543709100

Metal detector splitter

Metal Separator
During the plastic molding process, thin metals inside the raw materials always present invisible hidden hazards to our molding equipment, for example, screws of molding machines are abnormally worn and torn and nozzles are blocked, etc. Most of those hazards are caused by metals existing in the raw materials. HADRDEGA also has perfect solution for hazards of that field.

 

Gravity Fall Metal Separator for Plastic, Needle

What can we bring for you?
Reduce damaging risks of metals existing in the raw materials to screws of the molding equipment and decrease the maintenance costs;
Avoid production halts which are caused by blockage of nozzles of the moldings machine;
Improve quality of the products and the production efficiency
Equipment installation
Can be installed on the charging basket;
Can be installed on the molding machine;
Can be installed inside the pipeline.
Gravity Fall Metal Separator for Plastic, Needle



 

Metal detector splitter

Metal Separator
During the plastic molding process, thin metals inside the raw materials always present invisible hidden hazards to our molding equipment, for example, screws of molding machines are abnormally worn and torn and nozzles are blocked, etc. Most of those hazards are caused by metals existing in the raw materials. HADRDEGA also has perfect solution for hazards of that field.

 

Gravity Fall Metal Separator for Plastic, Needle

What can we bring for you?
Reduce damaging risks of metals existing in the raw materials to screws of the molding equipment and decrease the maintenance costs;
Avoid production halts which are caused by blockage of nozzles of the moldings machine;
Improve quality of the products and the production efficiency
Equipment installation
Can be installed on the charging basket;
Can be installed on the molding machine;
Can be installed inside the pipeline.
Gravity Fall Metal Separator for Plastic, Needle



 

Ridge capping Roll Forming Machine is a necessary equipment if you are a roof contractor.The ridge caps are widely used in residential house,workshop,commercial building.It is a continuous machine with PLC control system,different length can be done.Ridge cap forming machine is composed of single arm decoiler,material feeding table,main forming part,automatic guillotine,control box,collecting table.

The final product can be cut as per set length controller,and the length is automatically measured by encoder.When final product reached set length,machine will stop to cut the sheet automatically.Finish thhis action,the machine will run again continuously.


Ridge Capping Forming Machine

Ridge Capping Forming Machine,Colored Coating Sheet,Metal Ridge Cap,Round Cap Cold Roll

Botou Golden Integrity Roll Forming Machine Co.,Ltd , https://www.jcxsteelrollformer.com