June 02, 2020

Steel Mesh Skeleton Plastic Polyethylene Compound Pipe Making Machine (XL-P)

Model NO.: SRP
Flexible Production: Intelligent Manufacturing
Production Scope: Product Line
Rhythm: Flow Production Line
Automation: Automation
Transmission Type: Rigid
Certification: ISO, CE
Color: Self-Selection
Trademark: xinlai
Specification: CE, SCS
Origin: Zhangjiagang, China
HS Code: 84778000
Feature and function

The reinforcing steel wire mesh makes thinner pipe wall, but higher pressure.
Adhesive binds high strength wire and PE together.

The polyethylene pipe has been reinforced by wrapping the high strength steel wire in the middle layer. It results the pipe working pressure could easily reach 5Mpa (D≤ φ 110), 3Mpa (D≤ φ 200), 2Mpa (D≤ φ 500) when you use PE80 grade polymer.

The new technology makes the PE pipe stronger, durable and reduces the material cost definitely.

Application &Projects

1. Water supply;

2. Gas supply;

3. Industry fields: Fluid and slurry transportation in factories and mines;

4. Gas drainage in coal mines

PN16 PN20 PN25
75 7.5 1.57 7.5 1.63 9 1.89
90 8 2.45 8 2.35 9.5 2.68
110 9 2.94 9 3.46 10 3.46
140 9.5 4.04 9.5 4.83 12 5.29
160 10 5.09 10 5.73 13 6.48
200 12 7.55 12 8.40 14 9.43
250 13 10.00 13 10.86 18 13.39
315 15 16.36 18 16.20 20 19.26
400 18 23.85 22 29.65 24 32.55
450 22 29.06 25 39.26

500 24 38.45 28 48.51


Die casting is a Aluminium or Zinc metal casting process that is characterized by forcing nolten metal under high pressure into a die mold cavity. The mold cavity is created using two hardened tool steel dies which have been machined into shape and work similarly to an injection mould during the process. Most die castings are made from non-ferrous metals, specifically zinc, copper, aluminium, magnesium, lead, pewter, and tin-based alloys. Depending on the type of metal being cast, a hot- or cold-chamber machine is used.

The casting equipment and the metal dies represent large capital costs and this tends to limit the process to high-volume production. Manufacture of parts using die casting is relatively simple, involving only four main steps, which keeps the incremental cost per item low. It is especially suited for a large quantity of small- to medium-sized castings, which is why die casting produces more castings than any other casting process. Die castings are characterized by a very good surface finish (by casting standards) and dimensional consistency.

Die Casting Mould

Die Casting Mould,Pressure Washer Aluminium Die Casting,Power Tools Aluminium Die Casting Mould,Filter Rear Cover Die Casting Mould

Zhejiang Ceeto Molding Technology Co.,Ltd. , https://www.ceetomold.com