April 07, 2020

Precision Non Standard Ejector Pin of Mold Parts

Design Software: AutoCAD
Installation: Mobile
Certification: ISO
Standard: HASCO
Customized: Customized
Dme/DIN etc Standard: Customized Avalaible
Trademark: Datong or Neutre
Transport Package: PE Bag, Foaming Film, Carton, Plywood Box
Origin: Dongguan Guangdong China
HS Code: 8480719090
Design Software: AutoCAD
Installation: Mobile
Certification: ISO
Standard: HASCO
Customized: Customized
Dme/DIN etc Standard: Customized Avalaible
Trademark: Datong or Neutre
Transport Package: PE Bag, Foaming Film, Carton, Plywood Box
Origin: Dongguan Guangdong China
HS Code: 8480719090
Product's name: Precision Non Standard ejector pin of mold parts
Treatment:Heat treatment 
Core hardness:HRC40-45, HRC58-60

Raw Material:SKD61,SKH51,HSS, 1.2344, H13, etc.
DATONG uses only high quality materials, which meet requirements of workability of the parts and compliance with the technical performance that the mold must ensure during its use.
These steels, which provide very high workability and do not require further heat treatment, allow time and money savings, and they have been designed specifically for the molding tools universe.
Machinery:
With the experience gained in 25 years of history, and the continuous updating of equipments and working procedures, we carry out all types of machining on steel and aluminum, carefully monitoring and controlling all the stages of production, either standard or special.


Quality control:
Our components are manufactured to meet European construction DIN and ISO standards currently in use. We have various inspection instruments to guarantee the quantity of our products, there is a very strict process of quality control before the shipment.
Package and shipment:
We guarantee the safety of the product by our standard or special package. Various shipment choices ensure you have the products in time.

Contact Information:
International sales manager:  DAN
Mobile: 0086 13592796418  (English, French)
   
 
 
 
 
  Product's name: Precision Non Standard ejector pin of mold parts
Treatment:Heat treatment 
Core hardness:HRC40-45, HRC58-60

Raw Material:SKD61,SKH51,HSS, 1.2344, H13, etc.
DATONG uses only high quality materials, which meet requirements of workability of the parts and compliance with the technical performance that the mold must ensure during its use.
These steels, which provide very high workability and do not require further heat treatment, allow time and money savings, and they have been designed specifically for the molding tools universe.
Machinery:
With the experience gained in 25 years of history, and the continuous updating of equipments and working procedures, we carry out all types of machining on steel and aluminum, carefully monitoring and controlling all the stages of production, either standard or special.


Quality control:
Our components are manufactured to meet European construction DIN and ISO standards currently in use. We have various inspection instruments to guarantee the quantity of our products, there is a very strict process of quality control before the shipment.
Package and shipment:
We guarantee the safety of the product by our standard or special package. Various shipment choices ensure you have the products in time.

Contact Information:
International sales manager:  DAN
Mobile: 0086 13592796418  (English, French)
   
 
 
 
 
 

Trapezoidal Roofing Sheet Roll Forming Machine

 

Working principle:

steel strip is made into trapezoidal roofing sheet by machine through cold-bend forming technology.

 

Usage:

Trapezoidal roofing sheet produced by roll forming machine are widely used in construction, transportation and other industries. It is mainly used for roofing and wall of buildings, such as steel structures, airports, storehouses,etc.

 

Component:

1.Decoiler 

2.Roll Forming System                

3.Cutting Device           

4.Hydraulic Station        

5.PLC control system       

 

Working Flow:

Loading coil – decoiling – guide feeding – main roll forming – hydrarlic cutting – finished products

Working Flow

 

Trapezoidal roofing sheet Roll Forming Machine Technique Parameters:

 

Processing material: aluzinc/galvanized steel/colored steel coil

Material thickness: 0.3-0.8mm

Main motor power: 4kw(can change as request)

Pump power: 4kw

Shaft diameter: 75mm and solid shaft

Forming steps: 15steps and more

Roller material: high grade 45# steel, hard Chromium plating

Main frame:300H steel

Medium plate thickness: 16mm

Speed:8-12m/min

Material of the cutting blade:Cr12

Control system: PLC computer control

Power supply: 380V, 3 Phase, 60Hz (can change as customers request)

 

Trapezoidal roofing sheet profile series:

Trapezoidal1 

Trapezoidal2

Our Trapezoidal roofing sheet Roll Forming Machine can greatly simplifie the production process and improve production efficiency.

Welcome visit our Factory!

Trapezoidal Roofing Sheet Roll Forming Machine

Trapezoidal Roofing Sheet Roll Forming Machine,Sheet Crimp Machine,Roofing Sheet Roll Forming Machine,Trapezoidal Cold Roll Forming Machinery

CANGZHOU DIXIN ROLL FORMING MACHINE CO., LTD , https://www.hebeimachine.com